DP65 Impact Disk Flowmeter
Quick Spec:
Metal construction
Operates horizontally or vertically
DN-40 to DN-500
Metal construction.
Operates horizontally or vertically.
DN-40 to DN-500
Flow rate:
- Water: 1.5 m3/h up to 1600 m3/h.
- Air: 45 Nm3/h up to 48,000 Nm3/h.
Low Pressure drop.
Straight pipe requirement of only 3 x DN
before & after.
Available with
Local indication only
1 or 2 Alarm Settings
4-20mA Transmitter with 2 or 4 wire system
Flow integrator/totalizer
3-15 psi transmitter
Flow totaliser
Intrinsically safe version ATEX EEx ia IIC T4/T6
Assembly Connections
- Between flanges (wafer) for DN-80 to DN-300
- Standard Flanges for DN-250 to DN-500
Operation
The fluid flows through the meter and displaces the target disc with a force proportional to flow. The disc movement is restricted with a coil spring until a force balance is achieved between the force from the fluid and the torsion of the spring. The equilibrium position of the target disc is proportional to the flow rate and provides the measurement of flow.
The position of the disc is transferred to the flow indicator through a magnetic coupling. This indirect coupling protects the measurement from any impacts on the disc.